Resources

The details need to be consider in the plastic injection molding

The details need to be consider in the plastic injection molding

The details need to be consider in the plastic injection molding

Read More
The details need to be consider in the plastic injection molding

The details need to be consider in the plastic injection molding

The details need to be consider in the plastic injection molding

Read More
How to consider  the cost for the plastic parts from injection molding

How to consider the cost for the plastic parts from injection molding

The cost for plastic parts is including three things

Read More
what is possible defect in toolling /plastic injection mould ?

what is possible defect in toolling /plastic injection mould ?

what is the possible defects in tooling or plastic injection mould ? here is the details for the defect and causes . Defect Causes Flash Injection pressure too high Clamp force too low Warping Non-uniform cooling rate Bubbles Injection temperature too hig

Read More
What is the  Progress for plastic injection molding

What is the Progress for plastic injection molding

The process cycle for injection molding is very short, typically between 2 seconds and 2 minutes, and consists of the following four stages: Clamping - Prior to the injection of the material into the mold, the two halves of the mold must first be securely

Read More
Sheet Metal Parts Design

Sheet Metal Parts Design

Bending and Reliefs One important element to keep consistent is the bend radius. Pick up any bent metal bracket or mount and look at the inside cornerssee that little radius there? Its created by a punch and die set on a press brake. Ideal Gruop can make

Read More
Selecting a Material for Stereolithography (SLA) 3D Printing

Selecting a Material for Stereolithography (SLA) 3D Printing

SLA uses a thermoset liquid, not a thermoplastic, which is UV-cured in layers to form final parts. Because of this major difference in fabrication methods, material properties like tensile strength, heat deflection, and flexural modulus may differ from SL

Read More
Creating Complex Undercuts in the plastic injection molding

Creating Complex Undercuts in the plastic injection molding

A bumpoffis a small undercut in a part design that can be safely removed from a straight-pull mold without the use of side actions. It works like the snaps on the wind flap of a parka or the snaps on a western style shirtpush to close, pull to open. If yo

Read More
How to  Add Text into Part Design in the plastic injection molding

How to Add Text into Part Design in the plastic injection molding

How to Add Text into Part Design in the plastic injection molding

Read More
10 Tips to Reduce Injection Molding Costs

10 Tips to Reduce Injection Molding Costs

While injection molding may seem costly compared to processes like CNC machining and 3D printing, the ability to scale and manufacture thousands of parts makes it a cost-effective solution for mass production.Determining the cost of injection molding is a

Read More
 Selecting a Rapid Prototyping Process

Selecting a Rapid Prototyping Process

There are many of ways prototypes can be made. As prototype processes continue to evolve, product designers are constantly trying to determinewhich method or technology is best for their unique application. This white paper explores the advantages and sho

Read More
Improving Part Design with  Wall Thickness in plastic injection molding

Improving Part Design with Wall Thickness in plastic injection molding

To achieve uniform wall thickness in the plastic injection molding , lets start with thebasics: Proper wall thickness will reduce the risk of cosmetic defects in plastic parts. Walls in any plastic-molded part should be no less than 40 to 60 percent that

Read More
Home 1 2 3 4 5 6 7 8 9 10 11 Next Last Total 65 Page 773 Records
We Chat: Venus
We Chat: Venus
We Chat: Nicole
We Chat: Nicole
We Chat: Phil
We Chat: Phil

Get In Touch or Get A Quote

+86-755-29667661 Moble,What's app, Wechat: (+86) 18675501860 Rfq@idmould.com/Info@idmould.com

Please place file(s) for transfer in the same folder and ZIP or RAR before attaching. Larger attachments can take a few minutes to transfer depending on your local internet speed :) For attachments over 20MB, click Idmould and send to Info@idmould.com.